IBM Visualization Data Explorer User's Reference

[ Bottom of Page | Previous Page | Next Page | Table of Contents | Partial Table of Contents | Index ]

Integer

Category

Interactor

Function

Generates an integer within a specified range of values.

Syntax

Available only through the user interface.

Inputs
Name Type Default Description
data object no default object from which interactor attributes can be derived
refresh flag 0 reset the interactor
min integer minimum data value minimum output integer
max integer maximum data value maximum output integer
delta scalar input dependent increment between successive integer outputs
method string input dependent defines interpretation of delta input
label string "Integer" global name applied to interactor stand-ins

Outputs
Name Type Description
output integer interactor output

Functional Details

This interactor provides incremental control of various functions in a visual program (e.g., the number of contour lines currently displayed on an isosurface in the Image window). The integer range over which the module acts is governed by its attributes (e.g., minimum, maximum, and delta), which in turn are either (1) specified by the parameter values in its Set Attributes... dialog box or (2) determined from input to the module (e.g, a data field). In the second case, the interactor is said to be "data driven."

Note: The interactor is invoked by double-clicking on its icon in the VPE window. Its configuration dialog box is accessed from the Edit pull-down menu in the same window.

data

is the object (usually a data field) from which the interactor can derive any or all of the minimum, maximum, and delta attributes when the corresponding input tabs are up.

refresh

resets the interactor so that the output is computed from the current input. If refresh = 0 (the default), the output is recomputed only if the current output does not lie within the range of the current data. The default for the output of the interactor is the midpoint of min and max.

min  and  max

specify the minimum and maximum values of the interactor's integer output. If set, these values override those implied by data.

If neither min nor data is specified, the interactor uses the minimum set in the Set Attributes... dialog box.

If neither max nor data is specified, the interactor uses the maximum set in the Set Attributes... dialog box.

delta

specifies a scalar value as a factor for calculating the increment between successive outputs over the specified range. The actual value depends on the interpretation specified by method (see below).

method

specifies the interpretation of delta:

  • "rounded": the increment (max - min) × delta is rounded to a "nice" number. The spacing between successive values will approximate the interval specified by delta. (For example, the default value of 0.01 specifies an interval of 1/100 of the specified range.)
  • "relative": the interpretation is the same as for "rounded," but the increment is not rounded.
  • "absolute": delta is the absolute value of the interval. (If delta has not been specified, its default is 1.)

    The default value for method depends on other input. The default is:

    • "rounded" if data is specified or if both min and max are specified.
    • "absolute" in all other cases.

label

is the global label of all instances of the corresponding interactor stand-in. An interactor instance's local label (set from the Control Panel) overrides a global label. By default, the global label is set by the user interface.

Example Visual Programs

Many example visual programs use Integer interactors. An example program that uses a data-driven integer interactor is WindVorticity.net

See Also

 IntegerList,  Scalar,  ScalarList,  Vector,  VectorList


[ Top of Page | Previous Page | Next Page | Table of Contents | Partial Table of Contents | Index ]
[Data Explorer Documentation | QuickStart Guide | User's Guide | User's Reference | Programmer's Reference | Installation and Configuration Guide ]

[Data Explorer Home Page | Contact Data Explorer | Same document on Data Explorer Home Page ]


[IBM Home Page | Order | Search | Contact IBM | Legal ]