IBM Visualization Data Explorer User's Reference

[ Bottom of Page | Previous Page | Next Page | Table of Contents | Partial Table of Contents | Index ]

Usage

Category

Debugging

Function

Prints information about current use of resources.

Syntax

Usage(what, how);

Inputs
Name Type Default Description
what string none the string to be printed
how integer 0 level of detail

Functional Details

The output of this module appears in the Message window of the user interface. Since, the module traverses the entire memory, it can be used to check for corruption of the memory area.

what

specifies what resource information is to be printed. Currently, the only allowed value for this parameter is "memory."

how

specifies the level of detail of the printout.

0

Prints out a summary of the total current use of memory. A typical printout might look like:

0: 58720256 bytes total : 1379008 in use, 57341248 free

1

Prints out a summary of current use of memory, both in small and in large arenas. A typical printout might look like:

0: small: 4194304 = hdr 16472 + used 486864 +
                    free 3920 + pool 3687048 (limit 4194304)
0: large: 2097152 = hdr 16472 + used 494656 +
                    free 29704 + pool 1558120 (limit 54525952)
where

small

is the total number of bytes currently managed by the memory manager for the small arena.

large

is the total number of bytes currently managed by the memory manager for the large arena.

hdr

is the amount of memory space used by internal data structures.

used

is the amount of memory space allocated for use.

free

is the amount of memory previously used and available for reuse.

pool

is the amount of memory space allocated to Data Explorer but not yet used.

limit

is the largest amount of memory that can be managed by the memory manager.

2

lists the number of blocks on each free list

3

lists the number of blocks on each free list plus the actual blocks on each free list

4

lists addresses of all allocated blocks (warning: very long)

5

lists addresses of all allocated and all freed blocks (warning: very long)

Note: You can easily specify Usage("memory", 0) by using the Show Memory Use button in the Commands menu of the Message window. The information provided by this module applies to memory use at the time of execution and should be interpreted with that restriction in mind. See DXPrintAlloc in IBM Visualization Data Explorer Programmer's Reference for more information.

Script Language Example

This example shows the use of memory before and after the Isosurface module is printed. (For this example, Data Explorer should be started with the -readahead off option.)

electrondensity = Import("/usr/lpp/dx/samples/data/watermolecule");
camera = AutoCamera(electrondensity,width=5);
Usage("memory", 1);
isosurface = Isosurface(electrondensity,0.3);
Usage("memory", 1);
Display(isosurface,camera);

See Also

 Trace


[ Top of Page | Previous Page | Next Page | Table of Contents | Partial Table of Contents | Index ]
[Data Explorer Documentation | QuickStart Guide | User's Guide | User's Reference | Programmer's Reference | Installation and Configuration Guide ]

[Data Explorer Home Page | Contact Data Explorer | Same document on Data Explorer Home Page ]


[IBM Home Page | Order | Search | Contact IBM | Legal ]